Introduction to the five main types of ONU device

SFU (Single Family Unit) type ONU device

Mainly used by individual home users, which only supports broadband access terminal function, the device has 1 or 4 Ethernet interfaces, providing Ethernet/IP services,supporting VoIP service (built-in IAD) or CATV service. It mainly used in FTTH occasions ( also can be used with a home gateway to provide greater business capabilities).
According to the difference between the service type and the number of ports of the ONU, there are three specific forms of the SFU-type ONU shown in Table 1.
Table 1: SFU ONU device specific form
NO.Ethernet POTSCATV RF
SFU-11 (GE or FE)0Optional
SFU-24 (FE)0Optional
SFU-34 (FE)2Optional

HGU (Home Gateway Unit) ONU device

This mainly used for individual home users, with home gateway function, equivalent to home gateway with EPON uplink interface, with 4 Ethernet interfaces, 1 WLAN interface and at least 1 USB interface, providing Ethernet/IP services, which can support VoIP or CATV service and TR-069 remote management. The device mainly used in FTTH solutions.
According to the difference between the service type and the number of ports of the ONU, there are two specific forms of the HGU-type ONU shown in Table 2.
Table 2: HGU ONU device specific form
NO.Ethernet POTS WLANUSBCATV RF
HGU-14 (FE)011Optional
HGU-24 (FE)211Optional

MDU (Multi-Dwelling Unit) ONU device

This device mainly used for multiple residential users, with broadband access terminal function, multiple (at least 8) user-side interfaces (including Ethernet interface, ADSL2+ interface or VDSL2 interface), providing Ethernet/IP services and supporting VoIP services (built-in IAD) or CATV service, which mainly used in FTTB/FTTC/FTTCab.
According to the difference in service types and port numbers of the ONU, the form of the MDU-type ONU is shown in Table 3.
Table 3: MDU ONU device specific form
NO.EthernetADSL2+VDSL2POTSCATV RF
MDU-18/16/24/32(FE)000Optional
MDU-28/16/24/32(FE)008/16/24/32/48Optional
MDU-3016/24/32/48/64024/32/48/640
MDU-40012/16/24/3224/32/48/640

SBU (Single Business Unit) ONU device

The device mainly used for multiple enterprise users or individual users in the same area, with broadband access terminal function, multiple Ethernet interfaces (at least 8), E1 interface and POTS interface, providing Ethernet/IP services, TDM service and VoIP service (built-in IAD), which mainly used in FTTB/FTTBiz.
According to the difference between the service type and the number of ports of the ONU, there are two specific forms of the MTU-type ONU shown in Table 4.
Table 4: SBU ONU device specific form
NO.EthernetE1POTS
SBU-144Optional

MTU (Multi-Tenant Unit) ONU device

The device mainly used for multiple enterprise users or individual users in the same area, with broadband access terminal function, multiple Ethernet interfaces (at least 8), E1 interface and POTS interface, providing Ethernet/IP services, TDM service and VoIP service (built-in IAD), which mainly used in FTTB/FTTBiz.
According to the difference between the service type and the number of ports of the ONU, there are two specific forms of the MTU-type ONU shown in Table 5.
Table 5: MTU ONU device specific form
NO.EthernetE1POTS
MTU-116(FE)4/80
MTU-28/16(FE)4/88/16

评论

发表评论

Popular blog posts

The difference between NB-IOT and Lora

图片
NB-IOT and Lora Introduction The wireless technologies of the  Internet of Things  are mainly divided into two categories: (1) One type is short-distance communication technology such as Zigbee, Wifi, Bluetooth, Z-wave; (2) The other type is LPWAN, which is a low-power wide-area network. LPWAN can be divided into two categories:  LoRa , SigFox, etc., which work on unlicensed spectrum, and 3GPP, which work in licensed spectrum. 2/3/4G cellular communication technologies such as EC-GSM, LTE Cat-m, NB-IoT, etc. The difference between NB-IoT and Lora 1. Frequency bands, quality of service and costs.  LoRa works in unlicensed frequency bands below 1Ghz, and does not require additional charges when applied. NB-IoT and cellular communication using licensed bands below 1 GHz are authorized and chargeable. 2. Battery life.  There are two important factors to consider regarding battery life, the current consumption of the node and the protocol content. LoRa is an asynchronous ALOHA-based
阅读全文

RL841EWV-DGB EPON ONU Router

图片
RicherLink RL841EWV-DGB  EPON ONU Overview EPON ONU Configuration The RicherLink RL841EWV-DGB  EPON ONU  brings carrier class high-end networking solution for advanced triple play services. It compliant with IEEE802.3ah standard, dual-band wireless for combined connection speeds of up to 1200 Mbps(867 Mbps on 5GHz and 300 Mbps on 2.4 GHz) , Layer 2/3, and high quality VoIP as well, RL841EWV-DGB ONU support the comprehensive triple-play services, including voice, video (IPTV or VoD), and high-speed internet access service. RicherLink RL841EWV-DGB EPON ONU MORE: www.richerlink.com/product/rl841ewv-dgb/ RicherLink  Technology Co., Ltd is a high-tech enterprise located in Shenzhen,China.The company provides customers with triple play business broadband access to the overall solution and help operators to provide their customers based on intelligent home gateway value-added services such as smart home,the overall network solutions,including the corresponding product development and
阅读全文

Introduction to the hierarchical model of GPON

GPON technical features are mainly reflected in the transmission convergence layer. The transmission aggregation layer is further divided into a PON frame sublayer and an adaptation sublayer. The framing sublayer of GTC (GPON Transmission Convergence) completes the ODN transmission function required for the encapsulation and termination of GTC frames. The specific functions of the PON (such as ranging, bandwidth allocation, etc.) are also terminated at the framing sublayer of the PON. The gametophyte layer is invisible. The adaptation sublayer of the GTC provides an interface between the PDU and the higher layer entity. The ATM and GEM information completes the conversion of the Service Data Unit (SDU) and the Protocol Data Unit PDU at the respective adaptation sublayers. The OMCI adaptation sublayer is higher than the ATM and GEM adaptation sublayers, which identify VPI/VCI and Port-ID and complete the exchange of OMCI channel data with higher-level entities. Application of GPON in
阅读全文